Harness and Section forms - Adding a Text Area control

A text area is an area in which the user types or pastes one or multiple lines of text, without formatting the text.

If formatting is required, use a Rich Text Editor control instead. If the text content is only a few words, use a Text Input control instead of the Text Area or Rich Text Editor controls.

A cell in a layout can present the value of a property as display-only or as an input field using the TextArea control, pxTextArea. You can configure a text area control, specifying the width, height, and maximum number of characters that users can enter into the text area. You can also display placeholder text and/or tooltips at runtime and configure actions based on events.

The UI Gallery landing page contains a working example of this element. To display the gallery, click Designer Studio > User Interface > Gallery > UI elements.

> Adding a Text area control

  1. From the Basic control group, select Text area .
  2. Drag the control into the layout and release the mouse button to drop the control.

    If you are using a cell-based layout and you drag the control into a cell that is not empty, then the dropped control replaces the current contents of the cell.

  3. Click the View properties icon to display the Properties panel and complete the following tabs:

General tab

Field Description
Property Press the down arrow to select a property reference that identifies a single text value.

Alternatively, you can drag a property name from the lists of properties visible in the Application Explorer. Typically, this works for Single Value properties belonging to in the Applies to class of the current rule (or a higher class). If the container in which this field sits has a non-blank Using Page value, you can drag a Single Value property from within that embedded page property.

Click the Open icon to review the property (if the reference is to an existing property in the Applies To class of this rule or a parent of that class). If the property is not found, the New dialog box for the property form appears.

You can reference properties on any page identified on the Pages & Classes tab, using the normal notation pagename.propertyname for pages other than the page corresponding to the Applies To class of the rule.

If this field is in a cell of a section that includes parameter declarations on the Parameters tab, you can enter the notation param.NAME here, to use a parameter value for the field, where NAME identifies a string parameter. Make sure that the NAME parameter is declared on the Parameters tab, and that your application provides a non-blank value for the parameter value in all possible situations where the section appears. See Sections — Completing the Parameter tab.

For a harness, the property generally must be on the primary page of the rule — the page corresponding to the Applies To key part of the rule. However, a section within the harness may have a different Applies To class, and that section can include properties from its own class.

If this field is always displayed as read-only, you can enter a linked property reference here, of the form .AAAA.BBBB, where AAAA is the linked property and BBBB is any property reference in the object identified by the value of AAAA as a key. For example, if the property AAAA has a value corresponding to a key of a Data-Admin-Operator-ID instance, then .AAAA.pyUserName presents that Operator ID's full name. This allows values from that object to appear (read-only) in the run-time display, though your processing does not explicitly load the object onto the clipboard.

Default value Optional. Enter a constant value for the property value, a property reference, or an expression, to be used only when the user form or flow action form appears in read-write mode rather than read-only mode.

Choose a default value that speeds data entry. When the system renders a harness or section in read-only mode (for example because the read-write mode requires a privilege that the current user does not hold), the default value does not appear, because data entry is not permitted.

Visibility

To control the visibility of the label, select one of the following:

  • Always : always visible
  • Condition (expression) : the region is visible under the specified condition. In the field that displays, select a condition or click the Gear icon to open the Condition Builder. You can define a simple expression based on the comparison of a pair of constants, properties, or both, combined by Boolean operators, such as .Color="Red". You can combine the expression with a when condition rule or another expression using the && and || operators.
  • Condition (when) : the region is visible under the specified condition. In the field that displays, select a when rule. Click the Open icon to create a new when condition or review an existing when condition.

If this section is to become part of navigation in a composite portal, you can make the header visible only when a specific space is the current space. Enter an expression here similar to the following:

pyCurrentSpace=="ASpaceName"
Then select the Run visibility condition on client check box.
Disable  
Wrap Text Select if the label is to be presented as multiple lines when the text is longer than the cell width. If this check box box is not selected, the label may appear truncated at runtime.
Required This box appears only for fields in cells on flow actions and sections. Select to require that (when the form appears at runtime in read-write mode) users cannot successfully submit the form if the field is blank.

Selecting Required marks the label for this field with an orange asterisk when the flow action form appears in read-write mode. (The asterisk also appears if the Label control's Value For field is not blank and the Label control's Required box is checked.)

For sections, checking this box enables client-side format validation when this section is part of a harness form that has the Enable Client Side Validation box selected on the HTML tab. At runtime, users who leave this field blank and submit the form are notified immediately that the field is required; the form is not transmitted to the server.

Identifiers  
Tour ID Optional: Provide an ID for use in a guided tour. Use a combination of numbers, letters, and underscores. Pega Platform uses the Tour ID when it finds an anchor button during a tour stop anchor point.
Test ID

Optional: If authorized, you can provide a unique Test ID for use in your test suite in order to support better automated testing against any Pega application.

When creating a control that supports Test ID, the Test ID field is initially blank. Use a combination of numbers, letters, and underscores, or click the Generate ID button to create a time stamp as a unique ID. The attribute data-test-id is then generated for the selected element. When you save an existing section, any supported controls that do not have a Test ID will have one automatically generated. You can override these with a custom ID at a later time.

Once generated, you can view your Test ID in HTML or display it in the Live UI panel. You also have the option to have all controls that support Test IDs in a ruleset updated in bulk.

A standard, out-of-the-box developer role, PegaRULES:SysAdm4, includes the privilege for Test ID. To disable Test ID for this role, modify the pxTestID privilege.

Presentation tab

Field Description
Edit Options Select an edit mode for this control. The edit mode of the control, specified here, takes precedence over section and harness settings.
  • Auto — the control uses the edit mode of the section or harness in which it appears. If the section is set to Read Only, then the control is Read Only. If the section is set to Auto, then the control uses the edit mode of the harness. For example, a New harness is editable, while a Review harness is read only.
  • Editable — the control is editable, regardless of the edit mode of the enclosing layout.
Read-only when Appears only when you select Read Only in the Edit Options field. Enter or select one of the following:
  • The When Name key part of a when condition rule. Click the Open icon to review or create the rule.
  • A simple expression based on the comparison of a pair of constants, properties, or both, combined by Boolean operators, such as .Color="Red". You can combine the expression with a when condition rule or another expression using the && and || operators.

As a best practice, use the Condition Builder to edit this field. Click the Open condition builder icon to open the tool. See Using the Condition Builder to configure dynamic UI actions.

Specify width

Select Auto if you want the layout to determine the width of the control area. This is the default. If you want to specify the width, select Custom and set the width in columns, pixels, or percent.

Specify height

Select Auto if you want the layout to determine the height of the control area. This is the default. If you want to specify the height, you can select Size to Content, which means setting the minimum number of pixels or rows to display, or Custom to set the height in pixels or percent.

Min/Max characters Optional. Enter a value that determines the minimum and maximum number of characters that can be entered in the text input. You can designate either value as unlimited by leaving it blank.
Tooltip If you want to display a tooltip when the user hovers the mouse pointer over the text input, press the down arrow to select the property that you want to display as a tooltip or type a text string within quotations, for example, "Select to open an item" .
Placeholder

Select None if you do not want to display placeholder text.

Select Other if you want to display a hint or instructional text in the field. The text disappears when the user enters a value. If the user does not enter a value, the placeholder text reappears when the field loses focus.

Style

Specifies the format of the text input. You can style text input controls and create additional formats in the skin rule. To select a custom format, press the down arrow and select Other.

Advanced Options  
Type
Select a format (read-only) used with this property. Your selection filters the format options.
Group/Selection Description
None The property is not formatted. There are no options.
Date Renders DateTime and Text property types in date-only format (hours and minutes are not displayed). See Understanding the Date, Time of Day, and DateTime property types.

Specify the format in the Date Format field.

Date/Time Renders DateTime and Text property types in date and time format. See Understanding the Date, Time of Day, and DateTime property types.

Specify the format in the DateTime Format field.

Number Numeric properties on output.
Text Unedited text, which may contain spaces, tabs, line break characters, and other control characters.
True/False Boolean values.

Specify the format in the True Label and False Label fields.

DateTime Format

or

Date Format

 
Text Alignment Appears if Type is Number.

Select left, right, or center alignment.

Decimal Places Appears if Type is Number.

A non-negative integer to control the number of digits presented after the decimal place. The default is Auto, which displays a maximum of three decimal places (placeholder zeroes are not added). Select to remove all digits after the decimal point and round to the nearest integer. Select All to include all digits.

Scale Appears if Type is Number.

Select a label indicating the scaling you wish to apply to the number. The scales are K for thousands, M for millions, B for billions, and T for trillions. For instance, if you select Thousands, a value of 20,000 appears as "20 K." If Percentage, the value appears as a percentage sign (.8 appears as "80%").

Negative Format Appears if the Type is Number.

Select a format (minus sign or parenthesis) for displaying negative numbers.

You can also specify a CSS class if you select one of the Style Ref options. By default, the class name is NegativeNumber.

Symbol Appears if Type is Number. When a symbol is specified an additional character(s) is prepended to the value. Currency automatically uses the localized currency symbol, constant uses a string, and reference uses a property value.

Select an option for representing the number as

  • Currency — Formats the number as a currency using the default locale.
  • Constant — A text string or character (for example, "%") ASCII character that you enter.
  • Reference — A property value.
Separators Appears if Type is Number.

Select to use a thousands' separator. Depending upon the default locale, a comma or period is used.

Obfuscated

Appears if the Read-only format Type is Text.

Select Yes if you want the characters entered by the user to appear as a string of bullets. The input characters are initially added to the clipboard as unencrypted, clear text values. The system computes the hashed value only as the page is committed to the PegaRULES database. Thereafter, the hashed value appears in both the clipboard and the database row.

Auto Prepend Appears if Type is Text and the control is not obfuscated.

Select a property or constant that you want to add either before the displayed property value. For example, when the user name appears, the system can automatically prepend the user's title.

Auto Append Appears if Type is Text and the control is not obfuscated.

Select a property or constant that you want to add after the displayed property value. For example, when the user name appears, the system can automatically append the full mail extension to the name.

Show Value As Appears if the Type is True/False.

Select to label either outcome using Text or an Image.

True Image

False Image

Appears if the Type is True/False and Show Value As Image is selected.

Select an image to label either outcome. Used with a boolean type.

True Text

False Text

Appears if the Type is True/False and Show Value As Text is selected.

Enter a text string to label either outcome. Used with a boolean type.

If the Localize? check box is selected on the section's HTML tab, a SmartPrompt Appears in the Constant field in the Parameters dialog. Select a field value rule if you plan to localize the text. If this text is to be localized, enter no more than 64 characters. A field value rule with pyCaption as the second key part and this text as the final key part is needed for each locale.

Show validation messages in read-only mode  

Copying, deleting, duplicating, or moving a Text Area control

Use these Windows operations to speed development:
  • To move a cell containing a Text Area, select the cell and drag and drop it in another cell in the same layout or another layout.
  • To cut, copy, or paste a Text Area in a cell, right-click in the cell to access a context-menu.

About Flow Actions

About Harnesses

About Sections