You are here: User interface > User interface rules > Harness forms > Screen layout properties - Region properties - General tab

Screen layout - Region properties - General tab

Click in the header of the desired region of the screen layout to display the Properties panel for that region.

Field

Description

Section

Specify the section that you want to use. You can specify an existing section or type a new section name and click magnifying glass to create or open the section.

Standard Parameters

If standard parameters are:

  • defined for the section, then the parameters display here, along with a field into which you can enter the value that you want to pass to each parameter.
  • not defined for the section, then the No parameters to set message displays. To define parameters for the section, open the section and select the Parameters tab.

Alternatively, you can select the Pass current parameter page to pass the current parameter page to the section.

Visibility

Select one of the following to control when the region is visible:

  • Always: always visible
  • Condition (expression): the region is visible under the specified condition. In the field that displays, select a condition or click to open the Condition Builder. You can define a simple expression based on the comparison of a pair of constants, properties, or both, combined by Boolean operators, such as .Color="Red". You can combine the expression with a when condition rule or another expression using the && and || operators.
  • Condition (when): the region is visible under the specified condition. In the field that displays, select a when rule. Click magnifying glass to create a new when condition or review an existing when condition.
Run visibility condition on client?

Appears when you select Conditional Visibility and enter a simple expression in the field that displays.

Select the Run visibility condition on client check box to cause dynamic execution of the condition each time the value of a property stated in the condition changes. This cannot be used if the expression is combined with a when condition rule.

Conditions are automatically re-evaluated when the user updates a property value. By default, controls that allow typing, such as Text Input, are evaluated when the user leaves the field. To re-evaluate conditions as the user types, use the Apply Conditions action with a Keyboard event. See Control Form — Completing the Control tab.

Title Optional. Type text to display in the header or subheader. This text may include directives or JSP tags, such as <p:r > or <pega:lookup >.

If you plan to localize the application, choose the text carefully and limit the length to no more than 64 characters. A field value rule with this text as the final key part is needed for each locale. See About the Localization wizard.

Page context

Select or confirm the page context for the section:

  • Use current page context— uses the class (Applies To key part) of the current section
  • Use data page— in the field that displays, press the down arrow and select the data page. If the data page accepts parameters, then the parameters display here, along with a field into which you can enter the values that you want to pass to the parameters.
  • Use clipboard page— specify the clipboard page in the field that displays. Press the down arrow and select to reference:
    • a property on the primary page: select Primary. Primary, followed by a dot, displays in the field. Press the down arrow to select the property name that you want to use as the page context for the section.
    • a parameter on the parameter page: select Param. Param, followed by a dot, displays in the field. Press the down arrow to select the parameters you want to specify as the page context for the section.
  • Use page defined by property— specify the property that defines the page that you want to use.
Refresh condition

Optional. Enter a simple expression based on the comparison of a pair of constants, properties, or both, combined by Boolean operators. Click to open the Condition Builder. Click magnifying glass to review or create a new rule.

As a best practice, use the Condition Builder to edit expressions, or to trigger a refresh based on a property change or the addition or deletion of a row or column in a repeating layout. The editor also enables you to specify a pre-activity or data transform.

See Using the Condition Builder to configure dynamic form actions.

Associated privileges Select this check box to enable only users with specific privileges to view or update the section.
View privilege

Optional. To restrict the presentation of this section (in read-only mode) to those users who hold a specific privilege, select the Privilege Name key part of a privilege rule. Click magnifying glass to review or create the privilege rule.

Update privilege

Optional. To restrict the presentation of this section (in read-write mode) to those users who hold a specific privilege, select the Privilege Name key part of a privilege rule. Click magnifying glass to review or create the privilege rule.

If a user holds the privilege in the View Privilege field but does not hold the privilege identified in this field, the section appears in read-only format. In this case, default values for fields are not shown.

Display header and title

Enter text to appear in the header or subheader. This text may include directives or JSP tags, such as <p:r > or <pega:lookup >.

If you plan to localize the application, choose the text carefully and limit the length to no more than 64 characters. A field value rule with this text as the final key part is needed for each locale. See About the Localization wizard.

Defer load contents

Optional. Choose this option to delay loading at runtime of the section content until the user clicks the header. Deferring enables users to start using other parts of the page rather than waiting for this section to load.

To enable users to take actions, such as submit, on a work item while other content is still being loaded, configure sections to use defer loaded asynchronous declare pages. See PDN How to configure non-blocking UI using Asynchronous Declare Pages (ADP).

Specify a pre-loading activity

Displays when you select the Defer load contents check box.

Select to run an activity prior to loading the section. Press the down arrow in the Activity field and select the activity that you want to run. Click magnifying glass to review or create the activity rule.

Run Data Transform

Displays when you specify a Refresh condition.

Select to run a data transform prior to refreshing the section. Press the down arrow in the field that displays and select the data transform.

Run Activity

Displays when you specify a Refresh condition.

Select to run an activity prior to refreshing the section. Press the down arrow in the field that displays and select the activity that you want to run.

Associated privileges Select this check box to enable only users with specific privileges to view or update the section.
View Privilege

Optional. To restrict the presentation of this section (in read-only mode) to those users who hold a specific privilege, select the Privilege Name key part of a privilege rule. Click magnifying glass to review or create the privilege rule.

Update Privilege

Optional. To restrict the presentation of this section (in read-write mode) to those users who hold a specific privilege, select the Privilege Name key part of a privilege rule. Click magnifying glass to review or create the privilege rule.

If a user holds the privilege in the View Privilege field but does not hold the privilege identified in this field, the section appears in read-only format. In this case, default values for fields are not shown.

Container Settings Displays if you selected the Include header checkkox.
Title Optional. Type text to display in the header or subheader. This text may include directives or JSP tags, such as <p:r > or <pega:lookup >.

When you plan to localize the application using this rule, choose the text carefully and limit the length to no more than 64 characters. When practical, choose a caption already included in a language pack, to simplify later localization. A field value rule with this text as the final key part is needed for each locale. See About the Localization wizard.

Include icon with title Select if you want to include an icon in the title bar.
Icon

Optional. Clickto open the Image Library landing page and select an image to include on the left side of the header.

Icon title

If you want to display a tooltip when the user hovers the mouse pointer over the icon, type a text string within quotations, for example, "Select to view list".

Header type

Select one of the following header styles. This field does not appear if the Format value is No Format, Hidden, Hidden Sub, Custom, or Outline.

Bar

Provides a static horizontal bar at the top of the layout.

Collapsible

Provides a horizontal bar at the top of the layout, with the ability to expand or collapse, to show or hide the layout, when clicked

Fieldset

Provides no header area, but a border around the contents of the layout with a single text label. (This produces HTML FieldSet and Legend elements).

This field does not appear in container and harness panels.

Expand/Collapse Select to allow the user to collapse this region of the screen layout at runtime by clicking an expand/collapse icon.
User resizable Select this check box if you want to enable the user to resize the screen layout. This option is available for screen layout formats in which responsive breakpoints are set in the skin. You can set responsive breakpoints for screen layout formats with left and/or right regions.

 

About Harnesses

Definitions dynamic layout
screen layout
Related topics Harness form - Adding a screen layout
Skin form — Components tab — Layouts — Dynamic layouts
Skin form — Components tab — Layouts — Screen layouts